Skip to Content
  1. All products
  2. Parts and Components
  3. IF1770 End Seal Blocks - Standard End Seal Blocks
  4. Parts and Components
Pricelist: Pricelist 24May08 Pricelist
Pricelist: Pricelist 24May08 Pricelist

IF1770 End Seal Blocks - Standard End Seal Blocks

  • Replacement end seal blocks for the IF1770 inverted horizontal flow wrapper
  • Standard style · Part no. IF1770ESB
  • Ships from Santa Clarita, CA · free UPS Ground on orders of $299+ (US)

Not sure which style you run? Call +1 (833) 722-3456 or send us a photo of your current blocks with the machine model and serial number.

$ 1,051.22 $ 1,051.22

Add to cart Buy now
Add to wishlist

Internal Reference: IF1770ESB

Fits the IF1770
Confirm the model before ordering
Standard style
Other styles for this machine below
Part no. IF1770ESB
Quote it when you call or write
Free UPS Ground shipping
On orders of $299 or more, US · ships from Santa Clarita, CA

IF1770 end seal blocks — Standard

End seal blocks are the sealing jaws that close the two ends of the package on a horizontal flow wrapper. Each set is precision-machined to hold uniform sealing pressure and temperature, so the transverse seals stay consistent at production speed. See the IF1770S flow wrapper.

Fit a new set to restore the original seal quality when the blocks are worn or damaged, to change the end seal format, or to add another block set to the machine.

Standard format block for the IF1770. Other styles for this machine are listed below.

Specifications

Part numberIF1770ESB
MachineIF1770
StyleStandard
Weight14.00 lb
Ships fromSanta Clarita, CA

Other end seal block styles for the IF1770

Same machine, different format. This page is the Standard style.

IF1770 End Seal Blocks - Euro Hang Hole End Seal Blocks
Euro Hang Hole
IF1770ESBEHH

Keep the end seal station in spec

The parts that work with these blocks. All parts and components

End seal cutters
No tear notch, single notch, triple notch or full serrated. See the cutters or ask us for your machine.
End seal block shims, 0.05–0.40 mm
0.05mm · 0.10mm · 0.15mm · 0.20mm · 0.30mm · 0.40mm — thin spacers used to adjust block alignment and spacing.
End seal cutter shims, 0.05–0.40 mm
0.05mm · 0.10mm · 0.15mm · 0.20mm · 0.30mm · 0.40mm

Questions and answers

They are made for the IF1770 inverted horizontal flow wrapper. If you run a different model, an older machine, or you are not sure which block style is fitted, send us the model and serial number and a photo of the blocks — we confirm the fit before you order. Contact form · +1 (833) 722-3456.

Yes. The IF1770 styles are listed on this page — Euro Hang Hole blocks punch the hang hole as part of the end seal. Depending on the model, Bags Etc flow wrappers can run one-, two- or three-set end seal configurations; see options and upgrades or ask us.

After every shift, clean the end sealing knife and the sealing jaws with a steel wire brush — for Teflon-coated jaws use a moist cloth instead and take care not to damage the coating — then wipe dry. Oil the end sealing bearing on schedule. The full routine is in the flow wrapper maintenance guide.

Availability is shown above the Add to cart button; if a part is on backorder it says so there and we confirm the lead time by email. Orders ship from Santa Clarita, CA by UPS Ground — free on orders of $299 or more within the US.

Order online, or let us match the part

Have the machine model and serial number ready. Ships from Santa Clarita, CA — UPS Ground is free on orders of $299 or more (US).

Order now +1 (833) 722-3456 Send a photo of your blocks

More IF1770 end seal blocks

Pick the style that matches your machine.