Skip to Content

Flow wrapper applications

Flow wrapper for bars: protein, granola and snack bars

A flow wrapper forms a film tube around each bar, seals the fin and cuts the end seals. We size the machine to your bar and can run it on your product before you buy.

Since 2011
Santa Clarita, California
Hundreds
of flow wrappers in the field
In stock
machines ship in as little as 3 days
Free product testing
we send you the video and sample packs

Which machine fits your bar

Two full-servo standard models cover most bars. The compact F987S takes small bars; the F1380S takes longer, wider or taller ones.

SpecificationF987SF1380S
DriveFull servoFull servo
Bag length40–280 mm (1.57–11.02 in)80–500 mm (3.15–19.68 in)
Bag width30–110 mm (1.18–4.33 in)60–160 mm (2.36–6.29 in)
Max product height40 mm (1.57 in)70 mm (2.75 in)
Max film width250 mm (9.84 in)370 mm (14.56 in)
Rated speed*40–200 cycles/min30–225 cycles/min

Bag dimensions are the finished pack, not the product; film width is the roll. *Manufacturer-rated cycles per minute; actual output depends on the product, film and seal configuration.

What gets configured for your product

Sized to the product

The pusher set and end-seal blocks (one-up, two-up or three-up), tear-notch and hang-hole style, and flow direction are set up for your product.

Options, quoted separately

TTO or ink-roller printer for date coding, card feeder, cold-seal plate, nitrogen flush and conveyors.

Film matched to the machine

Plain or custom printed film, with minimums typically 2 to 4 rolls. See film for your flow wrapper.

Room to grow

Infeed conveyors, automatic infeeds and checkweighers can be added as volume grows. The wrapper stays the same.

From sample to running machine

You do not need to know the machine model to start.

Start with your product
1
Tell us the product
Size, weight, target speed and how it is packed today.
2
See it run
When we have the right machine here, we run your product and film and send you the video and sample packs at no charge.
3
Configure and ship
The machine is set up for your product and shipped from Santa Clarita. In-stock machines ship in as little as 3 days; build-to-order machines are typically 8 to 12 weeks.
4
Install and support
Installation and operator training are quoted with the machine. Parts, maintenance plans and phone and video support come from our own technicians.

See flow wrappers running

Demo videos of our flow wrappers on real products, and how other producers set up their lines.

Tell us about your bar

Send the bar size, the pack you want and the speed you need. We reply with the model that fits and a quote.

Protected by reCAPTCHA, Privacy Policy & Terms of Service apply.