Skip to Content
  1. All products
  2. Parts and Components
  3. IF1370 End Seal Cutter - Full Serrated Tear Notch Style
  4. Parts and Components
Pricelist: Pricelist 24May08 Pricelist
Pricelist: Pricelist 24May08 Pricelist

IF1370 End Seal Cutter - Full Serrated Tear Notch Style

  • Replacement end seal cutter for the IF1370 inverted horizontal flow wrapper
  • Full serrated edge · Part no. IF1370SESCSER
  • Ships from Santa Clarita, CA · free UPS Ground on orders of $299+ (US)

Not sure which cut style you run? Call +1 (833) 722-3456 or send us a photo of a finished package with the machine model and serial number.

$ 233.60 $ 233.60

Add to cart Buy now
Add to wishlist

Internal Reference: IF1370SESCSER

Fits the IF1370
Confirm the model before ordering
Full Serrated Tear Notch
Other cut styles for this machine below
Part no. IF1370SESCSER
Quote it when you call or write
Free UPS Ground shipping
On orders of $299 or more, US · ships from Santa Clarita, CA

IF1370 end seal cutter — Full Serrated Tear Notch

The end seal cutter is the knife that cuts each package free at the end seal and shapes how it opens. Bags Etc end seal cutters are built for clean, precise cuts at production speed and for durability under continuous use.

A straight-cut end with a fully serrated edge, so the package tears open easily anywhere along the width while the seal stays secure.

Fit a new cutter when the cut edge is no longer clean, or when you change the package opening style.

Specifications

Part numberIF1370SESCSER
MachineIF1370
Cut styleFull Serrated Tear Notch
Weight1.00 lb
Ships fromSanta Clarita, CA

The four cut styles

  • No Tear Notch — A clean, straight-cut end with no pre-cut notch, so the package is opened with scissors or a tool. The strongest, most secure closure of the four styles — used where the contents need extra protection, such as food or medical items.
  • Single Tear Notch — A straight-cut end with one pre-cut notch for easy hand tearing — a balance of convenience and security for products that need protection but are meant to be opened easily.
  • Triple Tear Notch — A straight-cut end with three tear notches, so the package opens easily from more than one point while the seal itself stays secure.
  • Full Serrated Tear Notch — A straight-cut end with a fully serrated edge, so the package tears open easily anywhere along the width while the seal stays secure.

Works with

End seal blocks for the IF1370
Euro Hang Hole · all blocks
End seal cutter shims, 0.05–0.40 mm
0.05mm · 0.10mm · 0.15mm · 0.20mm · 0.30mm · 0.40mm — thin spacers for setting the cutter.
End seal block shims, 0.05–0.40 mm
0.05mm · 0.10mm · 0.15mm · 0.20mm · 0.30mm · 0.40mm

Questions and answers

It is made for the IF1370 inverted horizontal flow wrapper. If you run a different model or an older machine, send us the model and serial number — we confirm the fit before you order. Contact form · +1 (833) 722-3456.

Choose by how the package should open: no notch for the most secure closure (opened with scissors), a single or triple notch for hand tearing from one or several points, or a full serrated edge to tear anywhere along the width. The IF1370 styles are listed on this page.

After every shift, clean the end sealing knife and the sealing jaws with a steel wire brush and wipe dry; the full routine is in the flow wrapper maintenance guide.

Availability is shown above the Add to cart button; if a part is on backorder it says so there and we confirm the lead time by email. Orders ship from Santa Clarita, CA by UPS Ground — free on orders of $299 or more within the US.

Order online, or let us match the part

Have the machine model and serial number ready. Ships from Santa Clarita, CA — UPS Ground is free on orders of $299 or more (US).

Order now +1 (833) 722-3456 Ask about your machine