Skip to Content
  1. All products
  2. Parts and Components
  3. F1380 End Seal Blocks - Narrow End Seal Blocks
  4. Parts and Components
Pricelist: Pricelist 24May08 Pricelist
Pricelist: Pricelist 24May08 Pricelist
F1380 End Seal Blocks - Narrow End Seal Blocks

F1380 End Seal Blocks - Narrow End Seal Blocks

  • Replacement end seal blocks for the F1380S servo horizontal flow wrapper
  • Narrow style · Part no. F1380ESBN1L / F1380ESBN2L
  • Ships from Santa Clarita, CA · free UPS Ground on orders of $299+ (US)

Not sure which style you run? Call +1 (833) 722-3456 or send us a photo of your current blocks with the machine model and serial number.

$ 1,137.36 $ 1,137.36

  • Number of Lines
Add to cart Buy now
Add to wishlist
Fits the F1380S
Confirm the model before ordering
Narrow style
Other styles for this machine below
Part no. F1380ESBN1L …
Quote it when you call or write
Free UPS Ground shipping
On orders of $299 or more, US · ships from Santa Clarita, CA

F1380S end seal blocks — Narrow

End seal blocks are the sealing jaws that close the two ends of the package on a horizontal flow wrapper. Each set is precision-machined to hold uniform sealing pressure and temperature, so the transverse seals stay consistent at production speed. See the F1380S flow wrapper.

Fit a new set to restore the original seal quality when the blocks are worn or damaged, to change the end seal format, or to add another block set to the machine.

Narrow format — match it to the blocks currently fitted to your machine.

Specifications

Part numberF1380ESBN1L / F1380ESBN2L — choose the option above
MachineF1380S
StyleNarrow
Ships fromSanta Clarita, CA

Other end seal block styles for the F1380S

Same machine, different format. This page is the Narrow style.

F1380 End Seal Blocks - Euro Hang Hole End Seal Blocks
Euro Hang Hole
F1380ESBEHH
F1380 End Seal Blocks - Standard End Seal Blocks
Standard
F1380ESB
F1380 End Seal Blocks - Tall Narrow End Seal Blocks
Tall Narrow
Part no. on request

Keep the end seal station in spec

The parts that work with these blocks. All parts and components

End seal block shims, 0.05–0.40 mm
0.05mm · 0.10mm · 0.15mm · 0.20mm · 0.30mm · 0.40mm — thin spacers used to adjust block alignment and spacing.
End seal cutter shims, 0.05–0.40 mm
0.05mm · 0.10mm · 0.15mm · 0.20mm · 0.30mm · 0.40mm

Questions and answers

They are made for the F1380S servo horizontal flow wrapper. If you run a different model, an older machine, or you are not sure which block style is fitted, send us the model and serial number and a photo of the blocks — we confirm the fit before you order. Contact form · +1 (833) 722-3456.

Yes. The F1380S styles are listed on this page — Euro Hang Hole blocks punch the hang hole as part of the end seal. Depending on the model, Bags Etc flow wrappers can run one-, two- or three-set end seal configurations; see options and upgrades or ask us.

After every shift, clean the end sealing knife and the sealing jaws with a steel wire brush — for Teflon-coated jaws use a moist cloth instead and take care not to damage the coating — then wipe dry. Oil the end sealing bearing on schedule. The full routine is in the flow wrapper maintenance guide.

Availability is shown above the Add to cart button; if a part is on backorder it says so there and we confirm the lead time by email. Orders ship from Santa Clarita, CA by UPS Ground — free on orders of $299 or more within the US.

Order online, or let us match the part

Have the machine model and serial number ready. Ships from Santa Clarita, CA — UPS Ground is free on orders of $299 or more (US).

Order now +1 (833) 722-3456 Send a photo of your blocks

More F1380S end seal blocks

Pick the style that matches your machine.